Показані роботи з 1 по 25, всього знайдено 36

Назва Автори Видання Рік ↓ Цитування
1 Incorporating fouling model in plate heat exchanger modelling and design Demirskyy, Olexiy; Kapustenko, Petro; Arsenyeva, Olga; Matsegora, Olexandr; Arsenyev, Pavlo; Tovazhnianskyi, Vladimir; Khusanov, Alisher 28TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING 2018 0
2 Thermal and hydraulic performance of pillow-plate heat exchangers Arsenyeva, Olga; Tran, Julian; Kenig, Eugeny Y. 28TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING 2018 0
3 Prediction of fouling tendency in PHE by data of on-site monitoring. Case study at sugar factory Demirskiy, Olexiy V.; Kapustenko, Petro O.; Arsenyeva, Olga P.; Matsegora, Olexandr I.; Pugach, Yana A. APPLIED THERMAL ENGINEERING 2018 2
4 Investigation of Fouling in Plate Heat Exchangers at Sugar Factory Demirskyy, Olexiy V.; Kapustenko, Petro O.; Khavin, Gennadii L.; Arsenyeva, Olga P.; Matsegora, Olexandr I.; Kusakov, Sergey K.; Bocharnikov, Igor O.; Tovazhnianskyi, Vladimir I. PRES2016: 19TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELING AND OPTIMIZATION FOR ENERGY SAVINGS AND POLLUTION REDUCTION 2016 1
5 Heat Transfer and Pressure Drop in Cross-Flow Welded Plate Heat Exchanger for Ammonia Synthesis Column Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Perevertaylenko, Olexandr Y.; Khavin, Genadiy L.; Arsenyeva, Olga P.; Arsenyev, Pavlo Y.; Khusanov, Alisher E. PRES2016: 19TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELING AND OPTIMIZATION FOR ENERGY SAVINGS AND POLLUTION REDUCTION 2016 0
6 Process Integration of Heat Utilised from Exhaust Gases Arsenyeva, Olga P.; Klemes, Jiri J.; Cucek, Lidija; Kapustenko, Petro O.; Savchenko, Yana 26TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING (ESCAPE), PT B 2016 0
7 Utilisation of waste heat from exhaust gases of drying process Arsenyeva, Olga P.; Cucek, Lidija; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Savchenko, Yana A.; Kusakov, Sergey K.; Matsegora, Oleksandr I. FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING 2016 7
8 Two types of welded plate heat exchangers for efficient heat recovery in industry Arsenyeva, Olga P.; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Khavin, Genadii L.; Yuzbashyan, Anna P.; Arsenyev, Pavlo Yu. APPLIED THERMAL ENGINEERING 2016 7
9 Intensification of Heat Transfer Processes Kapustenko, Petro O.; Kukulka, David J.; Arsenyeva, Olga P. PRES15: PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION 2015 1
10 Shell-and-Plate Heat Exchangers for Efficient Heat Recovery under the Industrial Application Arsenyeva, Olga P.; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Khavin, Genadii L.; Yuzbashyan, Anna PRES15: PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION 2015 0
11 Integration Processes of Benzene-toluene-xylene Fractionation, Hydrogenation, Hydrodesulphurization and Hydrothermoprocessing on Installation of Benzene Unit Kapustenko, Petro O.; Ulyev, Leonid M.; Ilchenko, Mariia V.; Arsenyeva, Olga P. PRES15: PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION 2015 0
12 Searches of cost effective ways for amine absorption unit design in CO2 post-combustion capture process Perevertaylenko, Olexander Yu.; Gariev, Andriy O.; Damartzis, Theodoros; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Arsenyeva, Olga P. ENERGY 2015 8
13 The Development of Heat Substation for Drying Waste Heat Utilisation Garieva, Andrii O.; Klemes, Jiri J.; Kusakov, Sergey. K.; Tovazhnyansky, Leonid L.; Anokhin, Petr; Kapustenko, Petro O.; Arsenyeva, Olga P.; Cucek, Lidija PRES 2014, 17TH CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, PTS 1-3 2014 3
14 About the Possibilities of the Heat Exchangers Network Retrofit for Post-Combustion CO2 Capture Unit Without Stream Split Perevertaylenko, Oleksandr Yu.; Gariev, Andrii O.; Damartzis, Theodoros; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Arsenyeva, Olga P. PRES 2014, 17TH CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, PTS 1-3 2014 0
15 Heat exchangers for energy recovery in waste and biomass to energy technologies - I. Energy recovery from flue gas Kilkovsky, Bohuslav; Stehlik, Petr; Jegla, Zdenek; Tovazhnyansky, Leonid L.; Arsenyeva, Olga; Kapustenko, Petro O. APPLIED THERMAL ENGINEERING 2014 19
16 Generalised semi-empirical correlation for heat transfer in channels of plate heat exchanger Arsenyeva, Olga P.; Toyazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Demirskiy, Oleksiy V. APPLIED THERMAL ENGINEERING 2014 8
17 Heat integration of ammonia refrigeration cycle into buildings heating systems in buildings Boldyryev, S. A.; Garev, A. O.; Klemes, J. J.; Tovazhnyansky, L. L.; Kapustenko, P. O.; Perevertaylenko, O. Yu; Arsenyeva, O. P. THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING 2013 0
18 Estimation of enhanced heat transfer area targets in process industries Arsenyeva, Olga P.; Smith, Robin; Bulatov, Igor; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Khavin, Gennadiy L. 23 EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING 2013 3
19 Process Integration for Energy Saving in Buildings and Building Complexes Kapustenko, Petro O.; Arsenyeva, Olga P. HANDBOOK OF PROCESS INTEGRATION (PI): MINIMISATION OF ENERGY AND WATER USE, WASTE AND EMISSIONS 2013 1
20 CFD Modelling of Hydrodynamics and Heat Transfer in Channels of a PHE Stogiannis, Ioannis A.; Paras, Spiros V.; Arsenyeva, Olga P.; Kapustenko, Petro O. 16TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION (PRES'13) 2013 4
21 The Modified Analogy of Heat and Momentum Transfers for Turbulent Flows in Channels of Plate Heat Exchangers Arsenyeva, Olga P.; Tovazhnyanskyy, Leonid L.; Kapustenko, Petro O.; Demirskiy, Oleksiy V. 16TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION (PRES'13) 2013 3
22 Energy efficiency of complex technologies of phosphogypsum conversion Tovazhnyansky, L. L.; Meshalkin, V. P.; Kapustenko, P. O.; Bukhkalo, S. I.; Arsenyeva, O. P.; Perevertaylenko, O. Yu. THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING 2013 1
23 The influence of plate corrugations geometry on plate heat exchanger performance in specified process conditions Arsenyeva, O.; Kapustenko, P.; Tovazhnyanskyy, L.; Khavin, G. ENERGY 2013 20
24 Ammonia Refrigeration Cycle Integration in Buildings Heating System Boldyryev, Stanislav A.; Kapustenko, Petro O.; Tovazhnyansky, Leonid L.; Garev, Andrey O.; Perevertaylenko, Oleksander Yu.; Khavin, Gennadiy L.; Arsenyeva, Olga P.; Klemes, Jiri Jaromir PRES 2012: 15TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION 2012 1
25 Mitigation of Fouling in Plate Heat Exchangers for Process Industries Kapustenko, Petro O.; Tovazhnyansky, Leonid L.; Arsenyeva, Olga P.; Yuzbashyan, Anna P. PRES 2012: 15TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION 2012 2


H H5 C C5
9 7 209 56

Експорт до csv-файлу: статей | авторов


© 2018 — Розроблено лабораторією інформаційно-пошукових систем НТУ "ХПІ"

Яндекс.Метрика